ACCESSORIES FOR METALLURGICAL MICROSCOPE

Micrometer Eye piece:
Fitted with 10mm scale in 100 parts

Object Micrometer Slide:
1mm in 100 divisions (Imported)

Filters:
Green, Yellow, Blue Daylight blue in metal mount.

100x Oil Immersion
Having imported lenses

Filar Micrometer Eye piece:

Grain Size Eyepiece:
WF 10x with 8 grain chart for rapid comparison of microstructure.

Beam Pocket Comparator
It is used for measurement of pitch of thread, radius and angles, surface finish and cracks after machining, forging, welding etc.
Used in general engineering, seed grain laboratories, electrical & electronics industries, textile industries, printing & block making industries, watch, Gem & Jewel industries.

MM-3

BINOCULAR METALLURGICAL MICROSCOPE

Fitted with Binocular head assembled from hard coated prisms. Bright field horizontal illuminator with centring provision, Quadruple revolving nose piece, straight tube for photomicrography, special graduated mechanical stage, supplied with variable light control transformer and following optics in box.

(a) Completes as above with ‘A’ grade indian optics.
(b) Complete as above with all optics having imported lenses.

MM-3A

BINOCULAR METALLURGICAL MICROSCOPE

Same as above with coaxial coarse & fine motion

(a) Completes as above with ‘A’ grade indian optics.
(b) Complete as above with all optics having imported lenses.

MM-6

BRINELL MICROSCOPE

7 mm Graticule Scale

Battery illuminated(L.E.E.D.)

Magnification : 30x

Field of  view : 9 Mm

Measuring Accuracy : 2-3 microns.

MM-2

INCLINED METALLURGICAL MICROSCOPE

Fitted with Monocular observation tube inclined at 45. Bright field horizontal illuminator with centering provision, field and aperture diaphragm and slots for dropping filter. Quadruple revolving nose piece. Special graduated mechanical stage, supplied with variable light control transformer and following optics in box.

(a) Complete as above with 'A' grade indian optics.
(b) Complete as above with all optics having imported lenses.

MM-2A

INCLINED METALLURGICAL MICROSCOPE

Same as above with coaxial coarse and fine motion.

(a) Complete as above with 'A' grade indian optics.
(b) Complete as above with all optics having imported lenses.

MM-5

INVERTED METALLURGICAL MICROSCOPE

A latest binocular inverted metallurgical microscope having co-axial, coarse and fine motion assembled on ball bearing guides, equipped with horizontal illuminator with centering provision, field and aperture diaphragm and slots for dropping filters. Built in base variable solid state transformer. Large sturdy stage with X-Y axis movements. Coarse and fine focusing knobs, supplied with two coloured filters in metal mount, raxine cover, complete in box.

(a) Complete as above with all optics having imported lenses.

Note
Extra charges for Trinocular head instead of Binocular head

MM-1

STUDENT METALLURGICAL MICROSCOPE

Monocular inclinable body having coarse and fine motion. Bright field horizontal illuminator with iris diaphragm and slots for dropping filter. Triple revolving nosepiece. Supplied with variable light control transformer and following optics in box.

(a) Complete as above with 'A' grade indian optics.
(b) Complete as above with all optics having imported lenses.

MM-4

TRINOCULAR METALLURGICAL MICROSCOPE

Fitted with trinocular head assembled from hard coated prisms. Bright field horizontal illumination with centering provision, iris diaphragm and slots for dropping filters. Quadruple revolving nose piece, special graduated mechanical stage, variable light control transformer built in the large sturdy base, with plywood carrying cabinet.

(a) Completes as above with ‘A’ grade indian optics.
(b) Complete as above with all having imported lenses.

MM-4A

TRINOCULAR METALLURGICAL MICROSCOPE

Same as above with co-axial coarse and fine motion.

(a) Completes as above with ‘A’ grade indian optics.
(b) Complete as above with all having imported lenses.