New improved model with quadruple nose piece having positive click stops based on balls, rotatable binocular head with hard coated prisms, co-axial focussing based on 4 stage gear reduction system, travelling on ball guides, locking device in coarse motion to avoid damage to valuable slides, built in co-axial mechanical stage for slide manipulation, built in light arrangement having 6v-20w halogen lamp and solid state variable light control system. Complete as above in plywood cabinet or thermocole packing with following optics.
pieces H 5x & WF 10x (pairs)
Objectives 5x, 10x, 45x (SL), 100x (SL) Oil immersion
a) Complete as above with 'A' Grade Indian Optics.
b) Complete as above with 'A' Grade Indian Optics & Imported 100x oil immersion.
c) Complete as above with all imported optics.

A much bigger and Robust Microscope compared with our BM-8bi observation head fitted with extra prisms for clarity and contrast. High degree performance and resolution is achieved through multilayer anti reflection coating on prisms. Heavy duty quadruple revolving nose piece having ball bearings Co-axial coarse and fine motion knobs on both sides based on a 4 stage gear reduction system travelling on ball guides. A large stage (145x125mm) fitted with mechanical stage having low drive Co-axial knobs travelling on balls. Built in halogen base 6v-20w halogen light source with light intensity regulator complete as above with hard coated IMPORTED LENSES mounted in India. Nicely packed in thermocole and wooden packing with following PARAFOCALISED & PRECENTRED OPTICS.
Objectives 5x, 10x, 45x (SL), 100x (SL) (Din size) Oil immersion
Eye piece Extra large WF 10x & H 5x (Paired)
Extra charges for Trinocular Head instead of binocular head. (Big Prism)

Inverted Binocular Microscope for tissue culture examination having coarse and fine adjustment, incident lamp with variable light control arrangement, with long working distance objectives and binocular head, complete with following optics in box.
LWD Objectives 5x, 10x, 20x, 40x
Wide Field Eye pieces 10x (Paired)

Same as model AW-10 but with twin bulb system. Packed in card board box. ( Powder Coated)

820 Spencer type) latest model, with one razor 120mm and honing stone. Feed range 150 micron in steps of one micron with automatic feed release device, complete in box with three object holders and raxine cover.

Virtical flask type, larg size very useful demonstration model with detailed key card
A. 2 Strokes
B. 4 Strokes

(Three side heating element) Standard double wall fabrication. Inner chamber made of richly anodized fabricated out of thick mild steel sheet duly finished in stoved enamel off - white paint or pastle mat finish colour combinations. The gap between the walls is filled with special grade grass wool for heat insulation. Inner chamber is ribbed for placing shelves at convenient levels. Provided with two or three removeable shelves. Special elegant door closing device has been provided.
Nichorome wire heating elements provided on three sides attain quick and uniform heating in range of 50ºC to 250º ± 1ºC control led by capillary type thermostat.
L-shaped theremometer is built in type. Control panel is provided with selector switch of high or low rates of power. Thermostat control knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.

A latest binocular inverted metallurgical microscope having co-axial coarse and fine motion assembled on ball bearing guides, equipped with horizontal illuminator with centring provision, field and aperture diaphragm and slots for dropping filters. Built in base variable solid state transformer. Large sturdy stage with X-Y axis movements. Coarse and fine focussing knobs, supplied with two coloured filters in metal mount, raxine cover, complete in box. Objectives M5x, M10x, M20x, M40x/45x Eye pieces WF 10x (paired) NOTE : Extra charges for TRINOCULAR HEAD instead of Binocular head.